D850 Firmware 1.10

General discussions, bugs, support, suggestions
Post Reply
RichJ
Posts: 35
Joined: 01.02.2015 10:03

D850 Firmware 1.10

Post by RichJ » 13.05.2019 04:51

This update (released this week) implements WiFi on this camera.

Has anyone tried it with HR yet?

Thanks

Richard.

User avatar
Catherine
Posts: 147
Joined: 29.04.2019 22:38

Re: D850 Firmware 1.10

Post by Catherine » 13.05.2019 14:27

We're corresponding with one person who tried it and was able to connect, see live view and adjust camera settings, but taking shots doesn't work for some reason yet unknown to us.
___________________
Catherine
Helicon Soft

RichJ
Posts: 35
Joined: 01.02.2015 10:03

Re: D850 Firmware 1.10

Post by RichJ » 13.05.2019 18:28

Thanks Catherine.

I tried last night, could not get the Bluetooth/WiFi transfer to work with Snapbridge.

Could not see how to set it up using the HR instructions but was rushed. Will try again.

Samsung Tab S is my device.

Richard

RichJ
Posts: 35
Joined: 01.02.2015 10:03

Re: D850 Firmware 1.10

Post by RichJ » 14.05.2019 07:23

Tried HR again... I can get as far as Camera detected successfully, but with msg to reset camera settings and try again. Do so and get the same, endlessly. Camera settings always come back the same, incl IP address when detected by the tablet.

Camera D850 FW 1.10, Tablet is Samsung Tab S.

Noted "use AF-S" in your guide, have set that (never use it), not sure why it's needed.

Richard

dialetonegro
Posts: 1
Joined: 19.05.2019 05:50

Re: D850 Firmware 1.10

Post by dialetonegro » 19.05.2019 05:51

It is working properly with my D5600

RichJ
Posts: 35
Joined: 01.02.2015 10:03

Re: D850 Firmware 1.10

Post by RichJ » 21.05.2019 06:10

Tried again.

HR version is 3.9.7 (Android) device is Samsung Tab S. Camera is Nikon D850 FW 1.10.

HR did work for many months wired to camera. Last such use was Feb 24. Several attempts to use it since have failed. Connects to device but after one task completed (ie Preview or focus), the software locks up. Only way out is to close HR.

With WiFi, camera is detected but HR Returns a message that configuration is wrong, have to reset camera network params. Do so and it just repeats the message. The same happens if my local wifi network is on or off.

What specific camera settings are required?

Richard

RichJ
Posts: 35
Joined: 01.02.2015 10:03

Re: D850 Firmware 1.10

Post by RichJ » 24.05.2019 05:42

Helicon Tech support has advised that WiFi still does not work with HR and this camera.

Richard

Post Reply