Aufnahmegeschwindigkeit

General discussions, bugs, support, suggestions
Post Reply
Hansjuerg
Posts: 2
Joined: 24.07.2021 15:02

Aufnahmegeschwindigkeit

Post by Hansjuerg »

Hallo zusammen
Ich bin am Testen von Helicon Remote Vers. 4.0.6W an einer Z6 mit einem Win10 PC.
Alle bis jetzt ausprobierten Punkte funktionieren.
Ich habe aber folgende Frage.
Wieso ist die Aufnahmegeschwindigkeit so langsam ? Ca. 1 Bild/3sec

Ich habe die Speicherung der Bilder auf dem PC abgestellt (alle Bilder in der Kamera belassen).

Danke für eine Antwort
User avatar
Catherine
Posts: 1157
Joined: 29.04.2019 22:38

Re: Aufnahmegeschwindigkeit

Post by Catherine »

3 seconds per shoot is good speed, you'll be hard-pressed to make it any faster. The remote control protocol adds its delays to the process, you can't compare how quickly you can take single shots one by one (with focus adjustments between them) to how quickly the camera itself can shoot in burst mode, for example.
Hansjuerg
Posts: 2
Joined: 24.07.2021 15:02

Re: Aufnahmegeschwindigkeit

Post by Hansjuerg »

Guten Tag Catherine

Danke für die rasche Antwort, auch wenn diese mich nicht befriedigen kann.
Ich erlaube mir etwas tiefer zu bohren :)

> Wenn ich Helicon Remote so einstelle, dass alle Bilder und Videos in der Kamera belassen werden
hat das Programm während einer Sequenz eigentlich nur noch die Daten für den Focusmotor und die Auslösung zu übermitteln.
> Gehen wir mal davon aus, dass Nikon diese Auslösung und eventuell auch den Schreibstatus zurückmeldet, ist mir unklar weshalb die Software da noch Verzögerungen einbauen muss.
> Eine automatische Shot-Folge von 0.5s wäre vielleicht auch eine Möglichkeit.

Heute Nachmittag ist es mir auch erstmals gelungen Helicon (auf meinem Tablet Samsung SMT870) via WLAN mit der Kamera zu verbinden.
>>> Das ist alles andere als benutzerfreundlich. Aber da trägt NIKON auch einen grossen Teil dazu bei.

Wenn ich so eine Focusreihe starte ich der Käfer gestorben bis die Sequenz fertig ist :mrgreen:

Noch etwas zur Kabelverbindung Kamera - Tablet.
Wenn ich Helicon nach einer erfolgreichen Kabelverbindung schliesse und wieder öffne, kommt die Verbindung nicht mehr zustande.
Ich muss dann das Tablet neu starten, dann klappt eine Verbindung wieder.
Ich vermute das ist dem Beta Satus der Software geschuldet.v4.0.7

Mit freundlichen Grüssen
Hansjürg
User avatar
Catherine
Posts: 1157
Joined: 29.04.2019 22:38

Re: Aufnahmegeschwindigkeit

Post by Catherine »

I understand - and share - your dissatisfaction, but the harsh reality is that 0.5 seconds between shot is not achievable even if you don't do any focus adjustment between shots, let alone with it. However, we plan to research this more closely and hopefully shave some time off this delay and make things a bit faster. But 5 times faster - very unlikely.

What problem(s) did you encounter with Wi-Fi connection?

As for reconnecting to the camera: first of all, we've updated the beta version on Android, it's now version 4.1.0, please give it a try. Is the same problem still there? If it is, please send a bug report (menu - Help - Report a bug) after the camera is not detected when it should be.
Post Reply