The Helicon Focus FB d'ont works

Post Reply
Robert
Posts: 1
Joined: 19.10.2019 11:34

The Helicon Focus FB d'ont works

Post by Robert » 19.10.2019 12:25

I have Canon 5D MIII with Canon 100mm macro 2,8 L IS USM and Helicon FB thube with magic cable.
The connection between helicon thube and Iphone works good
But whene i take pictures the focus stay always on the same place.
settings lens is MF, FULL
With the lens canon 24-105 works it normal.
What it's wrong?????

User avatar
Catherine
Posts: 142
Joined: 29.04.2019 22:38

Re: The Helicon Focus FB d'ont works

Post by Catherine » 27.10.2019 19:16

Please try setting the lens to AF, Full, camera focusing mode to AF-one shot. Does it make any change?

Also please try setting the step size to 150, just for a test: please set the step size in the app to 150 (don’t press Save), direction to infinity, and send the configuration to the tube, then focus on the nearest point making sure that the focus is not at the end of the focus range and has possibility to advance, and shoot series to see if you can see any changes in focus position. If the step has been set to small values, you might not have been able to see the focus advance, especially on few shots.

Post Reply