Recommended Step Width for Canon Lens 180 mm Macro ?

Post Reply
chvfabercastell
Posts: 1
Joined: 08.10.2019 09:54

Recommended Step Width for Canon Lens 180 mm Macro ?

Post by chvfabercastell » 08.10.2019 10:03

Hello Stas (?)

Whart is the Recommended Step Width for Canon Lens 180 mm Macro ? (For the 100 mm Macro II You suggest 21 if i am right, but in the Configuration List of Canon Lenses, the 180 mm Macro is not visible...)

Thankx
Christian from Switzerland

Hec65
Posts: 1
Joined: 14.10.2019 19:36

Re: Recommended Step Width for Canon Lens 180 mm Macro ?

Post by Hec65 » 14.10.2019 19:43

Use step with 15 at F 10.
See as well attache JPG for combinations with RAYNOX macro lenses
Canon_180_mm_Macro.JPG
Canon_180_mm_Macro.JPG (116.73 KiB) Viewed 3833 times
Regards
Hec65

MPRABHU
Posts: 4
Joined: 03.07.2019 17:05

Re: Recommended Step Width for Canon Lens 180 mm Macro ?

Post by MPRABHU » 21.10.2019 18:05

Hello Christian,

I see that you are using Canon 180 mm f/3.5 Macro lens which is Manual focus lens. Does it work with Helicon tube ?

Kind regards

Pantherman
Posts: 2
Joined: 26.11.2019 01:40

Re: Recommended Step Width for Canon Lens 180 mm Macro ?

Post by Pantherman » 26.11.2019 01:45

I have the Canon 180mm Macro, and it is an auto-focus lens with an internal USM motor for focusing. Is the lens you have a Canon L series lens?

Post Reply