Helicon Soft Forum

The R5 has nothing called FlexizoneAF{}. Helicon Remote instructions say to set this mode on Canons

For these cameras you must set the "AF method" to FlexiZoneAF[] (note the square brackets)

I just want to be certain I have it set correctly. What is the equivalent of "Flexi...." on the R5.

Thanks,

I don't know what focus modes are available on R5, the default mode should be fine. Autofocus is not used for focus bracketing, the important thing is that it must not trigger on its own. So make sure all intrusive/automatic modes are off (continuous, tracking, AI, face detection etc.).